Samsung RS2555BB User Manual (user Manual) (ver.1.0) (English) - Page 27

Installationof The Water Dispenser Line

Page 27 highlights

DA68-00500T(12.030)4.1.230:페5P이9M지27 INSTALLATION OF THE WATER DISPENSER LINE Connect the water line to the refrigerator. 1) Slip the compression nut and plastic ferrule through the plastic tube. 2) After inserting the sleeve, tighten the compression nut onto 1/4" compression fitting(union). Do not overtighten the compression NOTE nut. 3) Slip the compression ferrule and nut on copper (or plastic) tubing as shown. Tighten the comperssion nut onto the compression fitting(union). 4) Turn water on and check for any leakege. NOTE Water line must be connected to drinkable water only Install the water filter. 1) As shown, the fixed cap separates from the refrigerator by rotating it counterclockwise. Remove the water filter from the box and put a month indicator sticker on the filter as shown. Keep the cap(A) in a safe place for recapping, when NOTE you will not use the filter. 2) If the water filter was installed in March, put on the "SEP" sticker. 3) Remove the protective cap then position and insert the filter as shown. 4) Slowly turn the water filter clockwise 90º to align the indication mark on the cover, locking the filter in posi tion. Do not overtighten. SEPARATION OF RED CAP Compression Nut Ferrule Sleeve Compression fitting Ferrule Compression Nut (A) COVER FILTER STICKER (MONTH INDICATION) Please check that the indication line aligns with the lock position. NOTE 27 ALIGN THE INDICATION MARK WITH LOCK POSITION.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

27
INSTALLATIONOF THE WATER DISPENSER LINE
SEPARATION
OF RED CAP
STICKER
(MONTH INDICATION)
COVER FILTER
(A)
ALIGN THE INDICATION MARK
WITH LOCK POSITION.
1) As shown, the fixed cap separates from the refrigerator by rotating
it counterclockwise.
Remove the water filter from the box and put a month indicator
sticker on the filter as shown.
2) If the water filter was installed in March, put on the "SEP" sticker.
3) Remove the protective cap then position and insert the
filter as shown.
4) Slowly turn the water filter clockwise 90º to align
the indication mark on the cover, locking the filter in posi
tion. Do not overtighten.
Please check that the indication line aligns with the lock position.
Install the water filter.
NOTE
1) Slip the compression nut and plastic ferrule
through the plastic tube.
2) After inserting the sleeve, tighten the compres-
sion nut onto 1/4” compression fitting(union).
Connect the water line to the refrigerator.
Water line must be connected to drinkable water only
Do not overtighten the compression
nut.
NOTE
Keep the cap(A) in a safe place for recapping, when
you will not use the filter.
NOTE
NOTE
3) Slip
the compression ferrule and nut on cop-
per (or plastic) tubing as shown.
Tighten the comperssion nut onto the com-
pression fitting(union).
4) Turn water on and check for any leakege.
Compression Nut
Compression fitting
Sleeve
Compression Nut
Ferrule
Ferrule
DA68-00500T(1.3)
2004.1.20
3:59
PM
페이지27