Samsung RS264ABSH/XAA Quick Guide (easy Manual) (ver.1.0) (English) - Page 17

INSTALLATION OF THE REFRIGERATOR Checking the Dimensions of your Entrance Door Check the dimensions of your entrance door to determine whether the refrigerator can pass through it. Dimension (inches) Model Capacity (Cu. Ft) Width Case Height Depth without Hinge with Hinge with door without door RS263/RS264/RS265/RS267/RS269 26.1 35.9 68.8 70 34 30.5 Selecting the Location for the Refrigerator • Select a location with easy access to the water supply. • Select a location with enough space for the refrigerator. • Select a location without direct exposure to sunlight. • Select a location with level floor or close to it. NOTE • Before disassembling the freezer door, the water supply line needs to be disconnected. (If not, the water supply line can be damaged.) • See "Separating the water supply line from the refrigerator" on the next page. Allow sufficient space to circulate the air in the internal cooling system. • When the refrigerator does not have enough space, the internal cooling system may not work correctly. 4inches NOTE Allow clearance to the right, left, back and top when installing the refrigerator. This has the advantage of reducing power consumption. Do not install the refrigerator where the temperature will go below 50°F(10°C). 0.1inch 2 inches How to assemble the separable door handle (optional) - Make sure the "UP" mark on the rear of the handle is facing right side up. - Match the upper and lower Handle Locking Tabs on the doors to the handles. Fix the handles to the doors by sliding them down firmly. - Check the installation of the handles by pulling on them. - If the handles have been inserted correctly, they should not move. INSTALLATION INSTRUCTIONS 17