Samsung RS264ABSH/XAA Quick Guide (easy Manual) (ver.1.0) (English) - Page 26

CHECKING THE WATER DISPENSER LINE 1) In order to operate the ice maker properly, water pressure of 20 ~125 psi is required. In this range a 170 cc (5.74 ounces) paper cup can be filled in 10 secs. 2) The water filter removes particles. It does not sterilize or destroy any micro-organisms. 3) If the refrigerator is installed in an area with low water pressure (below 20psi), you should install a booster pump to compensate. 4) Ensure the water storage tank inside the refrigerator is properly filled initially. Push the water dis- penser lever until the water runs from the outlet. Water line installation kit is available at extra cost from your dealer. The refrigerator NOTE manufacturer recommends using a water supply kit containing copper tubing. Connecting to water supply line - Shut off the main water supply line and turn the Ice maker to the off position. - Locate the nearest cold drinking water line. - Follow the instructions in the ice maker installation kit. - After connecting the water supply with water filter, turn on water supply and flush 4 or more gallons into a bucket to clear the water filter 1. Cold Water line 2. Pipe Clamp. 3. Water Line Installation Kit 4. Shut Off Valve 26