Samsung RSG257AARS User Manual (user Manual) (ver.0.9) (English) - Page 13

LEVELLING the refrigerator, When the Freezer part is lower than the Fridge part. - refrigerator parts

Page 13 highlights

LEVELLING the refrigerator Now that the doors are back on the refrigerator, you want to make sure the refrigerator is level so that you can make final adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even. The front of the refrigerator is also adjustable. Before levelling the refrigerator, remove the front leg cover Open both the freezer and fridge doors, and then take off the front leg cover by turning the three screws counter-clockwise. 01 SETTING UP When the Freezer part is lower than the Fridge part. Insert a flat-blade screwdriver into a slot on the Freezer Leg, then turn it clockwise. When the Fridge part is lower than the Freezer part. Insert a flat-blade screwdriver into a slot on the Fridge Leg, then turn it clockwise. Screw Driver Freezer Leg Fridge Leg Screw Driver Refer to the next section for the best way to make very minor adjustments to the doors. setting up _13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

setting up
_13
01 SETTING UP
LEVELLING THE REFRIGERATOR
Now that the doors are back on the refrigerator, you want to make sure the refrigerator is level so that
you can
make final adjustments.
If the refrigerator is not level, it will not be possible to get the doors perfectly even.
The front of the refrigerator is also adjustable.
Before levelling the refrigerator, remove the front leg cover
Open both the freezer and fridge doors, and then take off the front leg cover by turning the three
screws counter-clockwise.
When the Freezer part is lower than the Fridge part.
Insert a flat-blade screwdriver into a slot on the Freezer Leg, then turn it clockwise.
When the Fridge part is lower than the Freezer part.
Insert a flat-blade screwdriver into a slot on the Fridge Leg, then turn it clockwise.
Refer to the next section for the best way to make very minor adjustments to the doors.
Fridge Leg
Screw Driver
Freezer Leg
Screw Driver