Samsung RSG257AARS User Manual (user Manual) (ver.0.9) (English) - Page 28

USING THE ICE MAKER, To Remove the Ice Bucket, Normal Operation - ice maker not working

Page 28 highlights

USING THE ICE MAKER To Remove the Ice Bucket - Hold the handle as shown in figure1. - Slightly pull up the bottom part. - Take out the ice bucket slowly. To Refit The Ice Bucket - Assemble it in the reverse order of disassembly. - Push the bucket in firmly until you hear a clicking sound. - When the bucket does not fit into its place, turn the gear handle on its back by 90 degrees and reinstall it again as shown in figure 2. Normal Operation - Any sounds you hear when the ice maker dumps ice into the bucket are part of normal operation. - Not dispensing ice for long periods may cause ice clumps in the ice bucket. Remove the remaining ice and empty the bucket. - When ice does not come out, Check for any ice stuck in the chute and remove it. - The first batch of ice cubes may be small due to air in the pipe after connection, any air will be purged during normal use. - W hen ICE OFF blinks on the display panel, reinsert the bucket and/or make sure it's installed properly. CAUTION - When the door is open, the Ice and water dispenser do not work. - If you close the door hard, it may cause water spilling over the ice maker. - T o prevent dropping the ice bucket, use both hands when removing it. - T o prevent injury, be sure to clean up any ice or water that may have dropped on the floor. - D o not let the children hang on the ice dispenser or on the bucket. They may get hurt. - Be sure not to put your hand or any object into the ice chute. It may cause personal injury or damage mechanical parts. Figure1 90。 Figure2 Ice Chute 28_ operating

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

28_
operating
USING THE ICE MAKER
To Remove the Ice Bucket
- Hold the handle as shown in figure1.
- Slightly pull up the bottom part.
- Take out the ice bucket slowly.
To Refit The Ice Bucket
- Assemble it in the reverse order of disassembly.
- Push the bucket in firmly until you hear a clicking sound.
- When the bucket does not fit into its place, turn the gear handle on its back
by 90 degrees and reinstall it again as shown in figure 2.
Normal Operation
- Any sounds you hear when the ice maker dumps ice into the bucket are part
of normal operation.
- Not dispensing ice for long periods may cause ice clumps in the ice bucket.
Remove the remaining ice and empty the bucket.
- When ice does not come out, Check for any ice stuck in the chute and
remove it.
- The first batch of ice cubes may be small due to air in the pipe after
connection, any air will be purged during normal use.
- When ICE OFF blinks on the display panel, reinsert the bucket and/or
make sure it’s installed properly.
- When the door is open, the Ice and water dispenser do not work.
- If you close the door hard, it may cause water spilling over the ice
maker.
- To prevent dropping the ice bucket, use both hands when removing it.
- To prevent injury, be sure to clean up any ice or water that may have
dropped on the floor.
- Do not let the children hang on the ice dispenser or on the bucket.
They may get hurt.
- Be sure not to put your hand or any object into the ice chute.
It may cause personal injury or damage mechanical parts.
90
90
Figure2
Ice Chute
Figure1
CAUTION