Samsung S19C200BR User Manual Ver.1.0 (English) - Page 82
Standard Signal Mode Table
View all Samsung S19C200BR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
10 Specifications 10.3 Standard Signal Mode Table z This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. z Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor. If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT monitor before you exchange it with the LCD monitor. If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual. S19C200NY Resolution IBM, 720 x 400 MAC, 640 x 480 MAC, 832 x 624 VESA, 640 x 480 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1280 x 720 VESA, 1366 x 768 Horizontal Frequency (kHz) 31.469 35.000 49.726 31.469 37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 45.000 47.712 Vertical Frequency (Hz) 70.087 66.667 74.551 59.940 72.809 75.000 56.250 60.317 72.188 75.000 60.004 70.069 75.029 60.000 59.790 Pixel Clock (MHz) 28.322 30.240 57.284 25.175 31.500 31.500 36.000 40.000 50.000 49.500 65.000 75.000 78.750 74.250 85.500 Sync Polarity (H/V) 82 10 Specifications