Samsung SCC-C6323 User Manual - Page 14

Installation Using Surface, Mount On The Ceiling

Get Samsung SCC-C6323 PDF manuals and user guides View all Samsung SCC-C6323 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Installation ❖ RS-485 Termination Resistor ON ON 12345678 • Pin 8 is used for ON/OFF of RS-485 Termination. Normally, it must be OFF state. Especially when you have trouble with long Daisy chain style connection, turn ON this termination switch of last camera. - Pin 8 RS-485 Termination Resistor (On/Off) INSTALLATION USING SURFACE MOUNT ON THE CEILING ❖ SCC-C6323 ① Setup DIP Switch (see previous page).  ③ Placing lower body to Surface Mount bracket. The cable must be properly handled into hole of bracket or side of lower body. ④ Make sure stopper pin of bracket pin is located the rightmost side of lower body groove as shown in the picture. Press the dome and turn clockwise till the pin is located leftmost side of groove. Detach protection vinyl from dome cover. ② Screw surface mount bracket to ceiling with 4 screws.  G 14 - 10X MINI SMART DOME CAMERA

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
14
– 10X MINI SMART DOME CAMERA
Installation
RS-485 Termination Resistor
Pin 8 is used for ON/OFF of RS-485 Termination.
Normally, it must be OFF state. Especially when
you have trouble with long Daisy chain style
connection, turn ON this termination switch of last
camera.
Pin 8
RS-485 Termination Resistor (On/Off)
INSTALLATION USING SURFACE
MOUNT ON THE CEILING
SCC-C6323
①
Setup DIP Switch (see previous page).
②
Screw surface mount bracket to ceiling with 4
screws.
❖
•
–
❖
③
Placing lower body to Surface Mount bracket.
The cable must be properly handled into hole of
bracket or side of lower body.
④
Make sure stopper pin of bracket pin is located
the rightmost side of lower body groove as
shown in the picture. Press the dome and turn
clockwise till the pin is located leftmost side
of groove. Detach protection vinyl from dome
cover.
1
2
3
4
5
6
ON
ON
7
8