Samsung SCC-C6323 User Manual - Page 7

ENG Introduction FEATURES ❖ Camera Specifications • CCD Sensor : 1/4" Interline Transfer CCD • Zoom Magnification : x10 Optical Zoom, x10 Digital Zoom (Max x 100 Zoom) • Day & Night Function • Various Focus Mode: Auto-Focus / Manual Focus / Semi-Auto Focus. • Independent or General Camera Characteristic Setup in Preset operation ❖ Powerful Pan/Tilt Functions • Max. 360°/sec high speed Pan/Tilt Motion • Using Vector Drive Technology, Pan/Tilt motions are accomplished in a shortest path. As a result, time to target view is reduced dramatically and the video on the monitor is very natural to watch. • For jog operation using a controller, since ultra slow speed 0.05°/sec can be reached, it is very easy to locate camera to desired target view. • Owing to zoom-proportional pan/tilt speed, camera can be moved to a desired position in accurate manner even though zoom ratio is high. ❖ Preset, Pattern, Auto Pan, Scan, Privacy Mask, Schedule and More... • MAX. 127 Presets are assignable and characteristics of each preset can be set up independently, such as White Balance, Auto Exposure, Label and so on. • Max. 8 Auto Pan can be stored. This enables to move camera repetitively between two preset positions with designated speed. • Max. 4 of Patterns can be recorded and executed. This enables for camera to track a surveillance trajectory as closely as possible which are recorded from operator's motion of joystick. • Max. 8 Scan can be stored. To compose a surveillance trajectory, the Group can have max. 20 entities of Preset/Pattern/Scan functions. This enables for camera to move a combinations of those functions repetitively. • Max. 4 Masks are settable independently to protect privacy zone. The mask is arbitrary-sized rectangular and locate any location in view space. • 7 rules of Schedule can be assigned by day and time. Appropriate actions (such as Home, Preset, Auto Pan, Pattern, Scan) can be defined for each rule. Also, it is possible to make rule by Weekday and Allday to simplify the rule. ❖ PTZ(Pan/Tilt/Zoom) Control • With RS-485 communication, max. 255 of cameras can be controlled at the same time. • Pelco-D/ Pelco-P, Samsung protocol can be selected as a control protocol in the current version of firmware. ❖ OSD(On Screen Display) Menu • OSD menu is provided to display the status of camera and to configure the functions interactively. • Currently, 7 Languages are supported for OSD Menu: [ENGLISH/ESPAÑOL/FRANÇAIS/ DEUTSCH/ITALIANO PORTUGUÊS] • The information such as Camera ID, Pan/Tilt/ Zoom/Direction, Alarm Input & Output, date/time, current temperature and Preset can be displayed on screen. • Each display item can be turned On or Off independently. ❖ Alarm I/O Functions • 2 alarm sensor Inputs and 1 relay output are available. • To reject external electric noise and shock perfectly, alarm sensor Input is decoupled with photo coupler. • If an external sensor is activated, camera can be set to move to the corresponding Preset position. • Relay output can be assigned to work with a certain preset. ❖ Reserved Presets for Special Purpose • Besides regular 127 presets, direct calling of reserved presets enables to set up many of camera functions with without using OSD menu. For more information, refer to "Reserved Preset" in this manual. English - 7