Samsung SCD-3080 User Manual - Page 13

Operating Your Camera Notes • If you set the Function Setup switch to 'AUTO' mode, You can adjust the brightness by increasing or decreasing the shutter speed. (x2 ~ x512) • Note that the higher the zoom level, the brighter the screen, but the more likely it is that an after-image will appear. • Although Noise, Spots and Whitish symptoms may occur in SENS-UP operation when the zoom level is increased, this is normal. RETURN : Select this to save the changes in the EXPOSURE menu and return to the SETUP menu. WHITE BAL (White Balance) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select 'WHITE BAL' by using the Function Setup switch so that the arrow indicates 'WHITE BAL' . 2. Select a desired mode using the Function Setup switch. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW ö Select one of the following 5 modes, as appropriate for your purpose.
ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K.
OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K. (sodium light inclusion)

INDOOR : Select this when the color temperature is between 4,500˚K and 8,500˚K. MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by using the ATW or AWC mode. After that switch to MANUAL mode, fine- tune the White Balance and the Function Setup switch. COLOR DOME CAMERA 24 SUD-3080
AWC ĄSET : To find the optimal luminance level for the current environment, point the camera towards a sheet of white paper and press the Function Setup switch. If the environment changes, readjust it. Notes • White Balance may not work properly under the following conditions. In this case select the OUTDOOR mode. ❶
W
hen the color temperature of the environment surrounding the subject is out of the control range (e.g. clear sky or sunset). ➋
When the ambient illumination of the subject is dim. ➌
I
f the camera is directed towards a fluorescent light or is installed in a place where illumination changes dramatically, the White Balance operation may become unstable. BACKLIGHT The SUD-3080 is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, by adopting a function of the proprietary SV-V DSP chip. 1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Function Setup switch so that the arrow indicates 'BACKLIGHT'. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 2. Select a desired mode using the Function Setup switch depending on the camera purpose. OFF : Not being used BLC : Enables a user to select a desired area on a picture and view that area more clearly. - LEVEL : Adjusts the brightness level of a monitoring area. - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced. COLOR DOME CAMERA 25 SUD-3080