Samsung SCD67 User Manual (user Manual) (ver.1.0) (English) - Page 77
Explanation/Solution - service manual
View all Samsung SCD67 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Troubleshooting ENGLISH ✤ If these instructions do not allow you to solve the problem, contact your nearest authorized service center. Symptom Explanation/Solution You cannot switch the camcorder on. Check the battery pack or the AC Power Adapter. START/STOP button does not operate while recording. Check the POWER switch is set to CAMERA. You have reached the end of the cassette. Check the record protection tab on the cassette. The camcorder goes off automatically. The battery pack is quickly exhausted. When you see a blue screen during playback. You have left the camcorder set to STBY for more than 5 minutes without using it. The battery pack is fully exhausted. The atmospheric temperature is too low. The battery pack has not been fully charged. The battery pack is completely dead, and cannot be recharged, Use another battery pack. The video heads may be dirty. Clean the head with a cleaning tape. A vertical strip appears on the screen The contrast between the subject and the background is too great for the camcorder to operate when recording a dark background. normally. Make the background brighter to reduce the contrast or use the BLC function while you are recording. The image in the viewfinder is blurred. The Viewfinder lens has not been adjusted. Adjust the viewfinder control lever until the indicators displayed on the viewfinder come into sharp focus. Auto focus does not work. Check the M.FOCUS menu. Auto focus does not work in the Manual Focus mode. Play, FF or REW button do not work. When you see a broken block image during EDIT SEARCH. Check the POWER switch. Set the power switch to PLAYER. You have reached the beginning or end of the cassette. This is normal and it is not a failure or defect. 73