Samsung SCL540 Instruction Booklet - Page 22
Connecting the Power Source
View all Samsung SCL540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
ENGLISH Connecting the Power Source 1 There are two ways to connect power source. - Using the AC Power Adapter : used for indoor recording. - Using the Battery Pack: used for outdoor recording. To use AC Power Adapter 1. Connect the AC Power Adapter to the AC cord. 1 2. Connect the AC cord to a wall socket. 2 Note: The plug and wall socket type may be different depend- ing on regional conditions. 3. Connect the other end of the DC cable to DC jack of the cam- 3 corder. 4. To set the camcorder to the CAMERA mode. a. Hold down the tab of the power switch and push the switch to CAMERAmode. b. Set LOCK/STANDBY switch to STANDBY. c. Make sure that the Lens Cap is open. d. Open the LCD monitor and make sure that the image appears in the LCD monitor. - The LCD monitor is turned on automatically when it's opened more than 30 degrees. 4-a CAMERA 4-b STANDBY Note: If the adapter is used next to a TV or the camcorder, it may cause the TV or camcorder to emit noise. Move the adapter away from the TV, camcorder or the antenna cable. 22