Samsung SCL906 User Manual (ENGLISH) - Page 69

Troubleshooting Checking ✤ If you run into any problem using the camcorder, use the following table to troubleshoot the problem. ✤ If these instructions do not allow you to solve the problem, take a note of: s The model and serial number marked on the bottom of the camcorder. s Your warranty, if applicable. ✤ Then contact your nearest Samsung authorized service center. Symptom You cannot switch the camcorder on. Explanation/Solution x Check the battery pack (see page 19) or the AC power adapter. (see page 18) Start/Stop does not operate while shooting. x Check the POWER, set it to CAMERA. x You have reached the end of the cassette. x Check the record protection tab on the cassette. (see page 22) The camcorder goes off automatically. x You have left the camcorder set to STANDBY for more than 5 minutes without using it. (see page 24) x The battery pack is fully used up. (see page 21) The battery pack is quickly exhausted. x The atmospheric temperature is too low. (see page 21) x The battery pack has not been charged fully. (see page 19) x The battery pack is completely dead, and cannot be recharged. Use another battery pack. You cannot eject the cas- x The battery pack is fully used up. sette from the compartment. x A mechanical fault might have occurred. (see page 64) The DATE/TIME indicator flashes more than 2 times when you set the camcorder to CAMERA. x The lithium battery is not installed or is fully used up. (see page 17) The playback picture is poor. x The video heads might be dirty. (see page 62) You cannot operate any x A mechanical fault might have occurred. (see page 64) functions on the camcorder. ENGLISH 65