Samsung SCP-3120 User Manual - Page 85

FUNCTIONAL DESCRIPTION INITIALIZE Initialization Menu ► Main Menu/Initialize • Power On Reset : Restarts the camera. • Factory Default Set : Enables resetting the camera to its factory default settings. When the mode is selected, all custom data such as preset locations is deleted from the camera. Use this function if it is necessary to reset the settings of the camera. Main Menu Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Password Setting • Camera Default Set : Status Resets the camera zoom module to the Factory Default mode; use if you want to reset all camera settings including Exposure and Backlight. Initialize Power On Reset • Auto Refresh : Factory Default Set Enables optimizing the status of the camera's built-in electric circuits and components on a regular basis. (A regular operation can be Camera Default Set Auto Refresh OFF scheduled.) This mode can be used to maintain and repair the current settings of the camera when anomalous operations occur: e.g. The camera happened to directly face a light source, or the settings have been canceled after the camera repeatedly rotated in all four directions for a long time to monitor a specific location. The default setting is Off. - OFF, 1~7 Days : Selecting Off disables Auto Refresh and selecting 1~7 Days automatically executes it after 1~7 days has passed. ❋ Auto Refresh takes approximately 10 seconds to finish. If Auto Refresh activates in the middle of a sequence action, the camera pauses the sequence action and performs an Auto Refresh, then resumes the sequence action once the refresh is complete. English English _ 85