Samsung SCV-2080R User Manual - Page 16

Initial value

Get Samsung SCV-2080R PDF manuals and user guides View all Samsung SCV-2080R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Operating Your Camera PRIVACY :Mask an area you want to hide on the screen. PRIVACY AREA SETUP 1. AREA 2. MODE 3. MASK COLOR 4. MASK TONE 5. TOP 6. BOTTOM 7. LEFT 8. RIGHT 9. RETURN AREA1 OFF GREEN 1 39 79 13 52 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates 'PRIVACY'. 2) Set up the mode using the Function Setup switch. - AREA :You can select up to 12 PRIVACY areas. - MODE : Determines whether to use the area selected in the AREA. - MASK COLOR :Determine area color.You can select Green, Red, Blue, Black,White, Gray. - MASK TONE :Adjust the brightness of MASK COLOR. - TOP/BOTTOM/LEFT/RIGHT :Adjust the size and position of the selected area. - RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu. D IS (Digital Image Stabilizer) : This function mitigates any picture movement due to external factors such as wind. Notes • As the DIS function uses the digital zoom the camera's resolution will decrease. • DIS doesn't operate when background illumination is too low. • DIS doesn't operate when object pattern is monotonic as like sky or white wall. COLOR DOME CAMERA 30 User Guide C OMM ADJ (Communication Adjustment) : This function sets up the camera communication status when controlling the camera through an external control device.  1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates 'COMM ADJ'. 2) Set up the mode using the Function Setup witch. - CAM ID : Determines the camera's identification number (between 0 and 255). - BAUD RATE : You can select 2400/4800/9600/19200/ 38400/57600 bps. - UART MODE : You can select NONE, EVEN or ODD for the parity bits. - RET PKT : D etermines whether to send a command back to the controller device when a communication control command is sent to the camera. - DISP CAM ID : D isplay camera title on top left corner of the screen. - Protocol : Select the communication PROTOCOL. (SAMSUNG-T/PELCO-D/PELCO-P/BOSCH/HONEYWELL/VICON/SAMSUNG-E/ PANASONIC) - RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu. * Initial value of communication adjustment Item Camera ID BAUD RATE UART MODE Initial value 1 9600 8-NONE-1 PET PKT ENABLE LANGUAGE : You can select the menu language according to your requirements. RETURN : S elect this to save the SPECIAL menu settings and return to the MAIN SETUP menu. EXIT Select a desired EXIT mode using the Function Setup switch. - SAVE : Save the current settings and exit the MAIN SETUP menu. - NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu. - RESET : R esets the camera settings to the factory defaults. Language, Communication and Monitor settings are not initialized. COLOR DOME CAMERA 31 User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
COLOR DOME CAMERA
User Guide
30
COLOR DOME CAMERA
User Guide
31
Select a desired EXIT mode using the Function Setup switch.
- SAVE : Save the current settings and exit the MAIN SETUP menu.
- NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.
- RESET : Resets the camera settings to the factory defaults. Language, Communication and Monitor
settings are not initialized.
EXIT
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when controlling the camera
through an external control device.
1)
When the SPECIAL menu screen is displayed, press the
Function Setup switch so that the arrow indicates
‘COMM ADJ’.
2)
Set up the mode using the Function Setup witch.
- CAM ID : Determines the camera's identification
number (between 0 and 255).
- BAUD RATE : You can select 2400/4800/9600/19200/
38400/57600 bps.
- UART MODE : You can select NONE, EVEN or ODD for
the parity bits.
- RET PKT : Determines whether to send a command back to the controller device when a
communication control command is sent to the camera.
- DISP CAM ID : Display camera title on top left corner of the screen.
- Protocol : Select the communication PROTOCOL.
(SAMSUNG-T/PELCO-D/PELCO-P/BOSCH/HONEYWELL/VICON/SAMSUNG-E/
PANASONIC)
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
* Initial value of communication adjustment
Item
Camera ID
BAUD RATE
UART MODE
PET PKT
Initial value
1
9600
8-NONE-1
ENABLE
LANGUAGE :You can select the menu language according to your requirements.
RETURN
: Select this to save the SPECIAL menu settings and return to the MAIN
SETUP menu.
• As the DIS function uses the digital zoom the camera's resolution will decrease.
• DIS doesn’t operate when background illumination is too low.
• DIS doesn’t operate when object pattern is monotonic as like sky or white wall.
Notes
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
PRIVACY : Mask an area you want to hide on the screen.
PRIVACY AREA SETUP
1. AREA
AREA1
2. MODE
OFF
3. MASK COLOR
GREEN
4. MASK TONE
1
5. TOP
39
6. BOTTOM
79
7. LEFT
13
8. RIGHT
52
9. RETURN
1)
When the SPECIAL menu screen is displayed, press the Function Setup switch so that the
arrow indicates ‘PRIVACY’.
2)
Set up the mode using the Function Setup switch.
- AREA : You can select up to 12 PRIVACY areas.
- MODE : Determines whether to use the area selected in the AREA.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray.
- MASK TONE : Adjust the brightness of MASK COLOR.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
Operating Your Camera