Samsung SF350 User Manual - Page 21
Attaching the Stand S24F356FH*/S27F358FW
View all Samsung SF350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Attaching the Stand (S24F356FH*/S27F358FW*) ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product. Insert the stand neck into the stand base in the direction shown in the figure. Check that the stand neck is firmly connected. Tightly fasten the connecting screw at the bottom of the stand base. Place a soft cloth over the table to protect the 3 product and place the product onto the cloth so that the front of the product is facing downwards. Hold the back of the monitor as shown in the figure. Push the assembled stand into the main body in the direction of the arrow as shown in the figure. - Caution Do not hold the product upside down only by the stand. - Caution Do not press down on the monitor. There is a risk of damaging the monitor. 21