Samsung SHR-6042 User Manual - Page 37

05 menu setup Motion Detection Setup Motion Detection Setup Alarm-Out Duration None Sensitivity High Area Set Default OK Cancel Set the motion detection area, sensitivity and alarm for each camera video. Press the Enter( ) button after moving the cursor on the camera to be set.  Alarm Out It sets the alarm output when a motion is detected. Currently the system supports 2 Alarm Out functions and 1 built-in speaker output.  Duration Sets the duration for Alarm Out. The alarm sound is sustained for the preset period. CONTINUE: The alarm output sound will be maintained until it is cancelled by pressing the ALARM button manually on the front panel. 10~300 Seconds: Sets the duration for alarm output.  Sensitivity It relates to configuration for motion detection and sensitivity. The sensitivity can be set to Very High, High, Medium, Low or Very Low.  Area Set If you press the Enter( ) button after moving the cursor to the video display area on the right, the motion area can be set/cancelled. ( ): Sets the whole part as the motion area. ( ): Cancels the whole motion area. If you press "Default", the motion setup is reset to the initial values. Video Loss Detection Setup Video Loss Detection Setup Alarm-Out None Duration 10 SEC None 10 SEC None None 10 SEC 10 SEC OK Cancel Move/Control Select Exit If a video loss occurs from each channel, it can be set to generate an alarm output sound.  Alarm Out Sets an alarm-out method when an event has occurred from the Alarm In. Currently, this system supports 2 Alarm Out functions and 1 built-in speaker (beep) output. The following screen appears when you press the Enter( ) button after moving the cursor to the Alarm Out item. 1 Beep OK 2 All Cancel  Duration Sets the duration for Alarm Out. The alarm sound is sustained for the preset period. CONTINUE: The alarm output sound is maintained until it is cancelled by pressing the ALARM button manually on the front panel. 10~300 Seconds: Sets the duration for alarm output. menu setup _33