Samsung SL-C2670FW User Manual Ver.1.0 (English) - Page 168
IPv6 configuration
View all Samsung SL-C2670FW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
IPv6 configuration IPv6 is supported properly only in Windows Vista or higher. 10 From the control panel If the IPv6 network seems to not be working, set all the network setting to the factory defaults and try again using Clear Settings: • Select (Setup) > Machine Setup > Next > Network Setup > Clear Settings on the touch screen. Activating IPv6 Accessing menus may differ from model to model (see "Menu overview" on page 31). The machine supports the following IPv6 addresses for network printing and managements. • Link-local Address: Self-configured local IPv6 address (Address starts with FE80). • Stateless Address: Automatically configured IPv6 address by a network router. • Stateful Address: IPv6 address configured by a DHCPv6 server. • Manual Address: Manually configured IPv6 address by a user. In the IPv6 network environment, follow the next procedure to use the IPv6 address. 1 Select (Setup) > Machine Setup > Next > Network Setup > TCP/IP (IPv6) > IPv6 Activate on the touch screen. 2 Select On to enable. 3 Turn the machine off and turn it on again. When you install the printer driver, do not configure both IPv4 and IPv6. We recommend to configure either IPv4 or IPv6. DHCPv6 address configuration If you have a DHCPv6 server on your network, you can set one of the following options for default dynamic host configuration. 2. Using a Network-Connected Machine 168