Samsung SL-C2670FW User Manual Ver.1.0 (English) - Page 45

Media and tray Transparency • In case of color printing using transparencies, the picture quality would be lower than mono printing when the printouts are used on the overhead projector. • Prints made on transparency film with this machine are not compatible with overhead projectors and may appear as a black and white image if projected. To avoid damaging the machine, use only transparencies designed for use in laser printers. • Ensure that transparencies are not wrinkled, curled, or have any torn edges. • Do not use transparencies that separate from the backing sheet. • To prevent transparencies from sticking to each other, do not let the printed sheets stack up as they are being printed out. • Recommended media: Transparency for a color laser printer by Xerox, such as 3R 91331(A4), 3R 2780 (Letter). Labels To avoid damaging the machine, use only labels designed for use in laser printers. • Must withstand the machine's fusing temperature. • Place them on a flat surface after removing them from the machine. • Do not leave unused transparencies in the paper tray for long. Dust and dirt may accumulate on them, resulting in spotty printing. • To avoid smudging caused by fingerprints, handle them carefully. • To avoid fading, do not expose printed transparencies to prolonged sunlight. • When selecting labels, consider the following factors: - Adhesives: Should be stable at your machine's fusing temperature about 170 °C (338 °F). - Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. - Curl: Must lie flat with no more than 13 mm of curl in any direction. 2. Menu Overview and Basic Setup 45