Samsung SL-M3065FW User Guide - Page 147

Installing driver over the network Silent installation Mode Silent installation mode is an installation method that does not require any user intervention. Once you start the installation, the machine driver and software are automatically installed on your computer. You can start the silent installation by typing /s or /S in the command window. Command-line Parameters Following table shows commands that can be used in the command window. Following command-line are effective and operated when command is used with /s or /S. But /h, /H or /? are exceptional commands that can be operated solely. Command- line /s or /S Definition Starts silent installation. Description Installs machine drivers without prompting any UIs or user intervention. Command- line Definition Description /p"" or /P"" Specifies printer port. Network Port will be created by use of Standard TCP/IP Port monitor. For local port, this port must exist on system before being specified by command. Printer port name can be specified as IP address, hostname, USB local port name, IEEE1284 port name or network path. For example: • /p"xxx.xxx.xxx.xxx" in where, "xxx.xxx.xxx.xxx" means IP address for network printer. / p"USB001", /P"LPT1:", / p"hostname" •/ p"\\computer_name\shar ed_printer" or "\\xxx.xxx.xxx.xxx\shared_ printer" in where, "\\computer_name\share d_printer" or "\\xxx.xxx.xxx.xxx\shared_ printer" means the network path to the printer by entering two slashes, the computer name or local IP address of the PC sharing the printer, and then the share name of the printer. 2. Using a Network-Connected Machine 147