Samsung SL50 User Manual (user Manual) (ver.1.1) (English) - Page 37

Self-timer ( ) / Right button Ê Selecting the self-timer 1. Select a Recording mode with the exception of Voice recording mode.(p.21) 2. Press the Self-timer / Right ( ) button until the desired mode indicator displays on the LCD monitor. A 10 second, 2 second, Double self-timer or Motion timer icon appears on the LCD monitor. 3. When you press the shutter button, the picture will be taken after the specified time has elapsed. [Selecting the 10 SEC self-timer] Ê Self-timer mode indicator Icon Mode Description 10 Sec Pressing the shutter button will allow an interval of self-timer 10 seconds before the image is taken. 2 Sec Pressing the shutter button will allow an interval of self-timer 2 seconds before the image is taken. Double self-timer Motion Timer A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. When using the flash, the 2-second self-timer may be delayed for longer than 2 seconds depending on the flash charging time. The camera detects the subject's movement 6 seconds after pressing the Shutter button, and the picture is taken when the movement is stopped. 036 Ê Motion Timer Motion Pressing the Shuter button after setting the Motion Timer Icon & Self-timer lamp Blink (1 second interval) Detecting the subject's movement Blink (0.25 second interval) No movement is detected Turn on and the image is taken after 2 seconds Ê The Motion Timer flows are as followings. (Movie mode excluded) Selecting the Motion Timer à Pressing the Shutter button à Confirming the composition (Within 6 sec.)*1 à Starting the detection (Swing your hands fully)*2 à Stopping the detection (Do not move) à Taking an image (after 2 sec.) *1: The camera detects the subject's movement 6 seconds after pressing the Shtter button, so confirm the composition within 6 seconds. *2: M ove your body or hands fully. In the following cases, the Motion Timer may not operate. å The focus distance is over 3m. The detection range of å The exposure is too bright or too dark. Motion Timer å In backlight conditions. å The movement is insignificant. å The movement is detected beyond the center part (50%) of the sensor where the movement is recognized. å If the camera doesn't sense any movement for 30 seconds, or the camera doesn't sense stillness after sensing movement.