Samsung SMT-2231 User Guide - Page 14
Setting up Your PC Software, Based on Windows XP, Display Modes
View all Samsung SMT-2231 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
USER'S MANUAL Press the PIP button on the remote control repeatedly to activate or deactivate the "PIP". 5. Press the / button to select "Source", then press ENTER button. Select a source of the sub picture by pressing the / button and press the ENTER button. 6. Press the / button to select Size menu, then press the ENTER button . 7. Press the / and ENTER button to select the size you want ( ). 8. Press the / button to select "Position", then press the ENTER button. Select the position of the sub picture by pressing the / button and then press the ENTER button( ). 9. Press the MENU button to exit. 4. Navigate to the "Screen resolution" tab on the Setting window. The correct size setting (resolution): Optimum- 1280 x 1024 If a vertical-frequency option exists on your Settings window, the correct value is "60Hz" or "75 Hz". Otherwise, just click "OK" and exit the window. Display Modes Both screen position and size will vary depending on the type of monitor and its resolution. The resolutions in the table are recommended. (All resolutions between the supported limits are supported.) Note: is the PBP function. Setting up Your PC Software (Based on Windows XP) The Windows Display Properies for a typical computer are shown above. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) The interlace mode is not supported. The set might operate abnormally if a non-standard video format is selected. Separate and Composite modes are supported. SOG is not supported. 1. First, click on "Control Panel" on the Windows start menu. 2. When the control panel window appears, click on "Display" and a Display Properies window will appear. 3. Click on "Setting" . - 14 -