Samsung SMT-4022 User Manual - Page 39

Main Screen, Main Icons, Select Button, Remocon, Info Grid, Safety Lock, Monitor Selection

Get Samsung SMT-4022 PDF manuals and user guides View all Samsung SMT-4022 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Main Screen Click Start > Program > Samsung > MDC System to start the program. Select a set to see the volume of the selected set within the slider. Main Icons Remocon Safety Lock Port Selection Select Button Info Grid Monitor Selection Control Tools 1. Use the main icons to switch into each screen. 2. Allows you to enable or disable the remote control signal receiving function of the monitor unit. 3. Set the Safety Lock function. When setting the Lock function, you can only operate power and lock buttons on the remote control and set. 4. The setting for the PC Serial Port can change. The original value is COM1. 5. Click Select all or Clear to select or clear all monitors. 6. Use Grid to view brief information on selected monitor. 7. Select a monitor from Monitor Selection. 8. Use Control Tools to control monitors. < Note>The remote control Enable/Disable function operates whether or not the power is On/Off, and this applies to all monitors connected to the MDC. However, regardless of the status at the time the MDC is shut down, the remote control signal receiving function of all monitors is initialized to Enable when the MDC is closed. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
Main Icons
Select Button
Remocon
Info Grid
Safety Lock
Monitor Selection
Port Selection
Control Tools
1.
Use the main icons to switch into each screen.
2.
Allows you to enable or disable the remote control signal receiving function of the monitor unit.
3.
Set the Safety Lock function.
4.
The setting for the PC Serial Port can change. The original value is COM1.
5.
Click Select all or Clear to select or clear all monitors.
6.
Use Grid to view brief
information on selected monitor.
7.
Select a monitor from Monitor Selection.
8.
Use Control Tools to control monitors.
<
Note>
MDC is closed.
Main Screen
Click Start > Program > Samsung > MDC System to start the program.
Select a set to see the volume of the selected set within the slider.
39
When setting the Lock function, you can only operate power and lock buttons on the remote
control and set.
The remote control Enable/Disable function operates whether or not the power is
On/Off, and this applies to all monitors connected to the MDC. However, regardless of
the status at the time the MDC is shut down, the remote control signal receiving function
of all monitors is initialized to Enable when the