Samsung SMX-F34SN User Manual (user Manual) (ver.1.0) (English) - Page 24
Battery Pack installation / ejection
View all Samsung SMX-F34SN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
preparation CONNECTING A POWER SOURCE • There are two types of power source that can be connected to your memory camcorder. • Do not use provided power supply units with other equipment. - The battery pack: used for outdoor recording. - The AC power adaptor : used for indoor recording and playing back. ➥page 21 Battery Pack installation / ejection It is recommended you purchase one or more additional battery packs to allow continuous use of your memory camcorder. Insert Inserting the battery pack 1. Slide and open the battery slot cover as shown in the figure. 2. Insert the battery pack into the battery slot until it softly clicks. • Make sure that the SAMSUNG logo is facing up while the set is placed as shown in the figure. 3. Slide and close the battery slot cover. Ejecting the battery pack 1. Slide and open the battery slot cover and push the battery lock. • Gently push the battery lock in the direction as shown in the figure to eject the battery out. 2. Pull the ejected battery out in the direction as shown in the figure. 3. Slide and close the battery slot cover. [BATT. RELEASE] Switch Eject • Store the battery pack separated from the memory camcorder while not in use. • It is recommended to prepare an additional battery pack for prolonged outdoor use. • Contact your nearest Samsung Electronics Service Center for purchasing additional battery pack. CARD CARD CARD English_14