Samsung SR1AM7040WG User Manual - Page 34

I I Information codes 1 The three indicators below blink with an error alarm. 2 Turn off the emergency switch and check the below instructions and take appropriate action 3 Information code will disappear when you turn on the emergency switch C.? R Please check the checklist information. The POWERbot is caught, stuck or trapped while moving around. 0 Turn off the emergency switch and move the POWERbot to another area. Foreign matter caught in the brush. ►Turn off the emergency switch and remove the foreign matter from the brush. Foreign matter caught in the left Driving wheel. 0 Turn off the emergency switch and remove the foreign matter from the Driving wheel. Foreign matter caught in the right Driving wheel. 0 Turn off the emergency switch and remove the foreign matter from the Driving wheel. Foreign matter caught in the auto shutter tool. 0 Turn off the product by pressing the emergency switch and remove the foreign matter from the auto shutter tool. Bumper sensor needs to be checked. 0 Turn off the emergency switch and turn it back on. ► When information code does not disappear, check if there's any small foreign matter between the bumper and the main body. If there is, pull the bumper slightly and remove the foreign matter. Foreign matter accumulated on the obstacle sensor. ► Turn off the emergency switch and clean the front and rear sensor with a soft cloth. Foreign matter accumulated on the cliff sensor. ► Turn off the emergency switch and clean the cliff sensor with a soft cloth. I I_VR7030_EN_OJI3S-03763C-02_USA.Ir4d 34 ENGLISH-34 2017-07-23 2?,. 12:244