Samsung SRD-1650DC User Manual - Page 44

VTJOH
UIF
%73 SETTING THE DEVICE You can setup Camera, Storage Device, Remote Device, POS Device and Monitor. Camera Setting the Camera You can set Video, Audio, Channel Name and Dwell Time of a Camera. Using the mouse may help make setup easier. 1. Press the [MENU] button on the remote control or front panel. 2. Use the left/right button (◄ ►) to select . Device setting menu is selected. 3. Use the up/down buttons () to move to , and press [ENTER] button. Device Camera Storage Device Remote Device POS Device Monitor Logout Exit 4. Select . You will see a window where you can configure the camera settings including Video, Audio, Channel Name, Dwell Time and Progressive. 5. Use direction buttons to move to a desired item, and set the value. • Video - : You can turn ON/OFF the selected channel's camera. Camera Camera PTZ CH Video b Audio b CH Name 1 ON b OFF b CAM 01 2 ON b OFF b CAM 02 3 ON b OFF b CAM 03 4 ON b OFF b CAM 04 5 ON b OFF b CAM 05 6 ON b OFF b CAM 06 7 ON b OFF b CAM 07 8 ON b OFF b CAM 08 Screen Setup SEQ-Dwell Time bProgressive b 5 sec b OFF b 5 sec b OFF b 5 sec b OFF b 5 sec b OFF b 5 sec b OFF b 5 sec b OFF b 5 sec b OFF b 5 sec b OFF b Previous/Next Page OK Cancel - : Shows information other than the video of the selected channel.  For privacy protection, it does not display the video while the recording continues. - : Shows nothing but an empty screen while the recording continues. M  No signal will be output from channels that are set to or for the video. However, audio recording will be performed for a channel whose audio is set to even if no audio signal is output from the Live screen. • Audio - If set to , you can turn the audio of the channel ON/OFF on the Live screen. - If set to , the channel's audio is off on the Live screen and not recorded.  Audio output is available for only 1 channel. M  SRD-830DC/1610DC/1630DC supports 1~4 channels of sound inputs. 44_ using the DVR