Samsung SRD-1650DC User Manual - Page 50
Setting the Monitor, Screen Setup
View all Samsung SRD-1650DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
VTJOHUIF%73 Monitor You can configure information to be displayed and its format for Spot Out monitor. Setting the Monitor Using the mouse may help make setup easier. 3. Use the up/down buttons () in window to move to , and press [ENTER] button. Monitor Monitor Spot Out Mode 4. Select . 5. Use direction buttons to move to a desired item, and set the value. • Event Display : Sets the dwell time of the event channel display on the monitor when an event occurs. If selected , it displays the channel until you press [ALARM] button to release it. x Event Display OFF x Display Date x Multi CH SEQ Time 5 sec Time CH Name Icon VGA 800x600 HDMI 480p x Sharpness Level1 (Low) Display Position Setup OK Cancel • Display : Displays only checked items on the monitor screen. • Multi CH SEQ Time : Sets the interval between automatic display switching in 4-split and 9-split mode of the Live screen. • VGA, HDMI : Select between and for screen output. Outputs either one of and . If the output setting of or does not match to the monitor, video may not be produced. In this case, press and hold the [MODE] and [ZOOM] buttons simultaneously for around 5 seconds to change the video output. SRD-830DC/1610DC/1630DC does not support the HDMI signal. • Sharpness : You can adjust the sharpness of the video output signal. 6. When the monitor setup is done, press . Screen Setup Some monitors many not display information (camera name, icon, time information, etc.) about the DVR, depending on the condition. Then, you can change the display position of the data. 3. In the window, press the up/down () button to move to and press the [ENTER] button. 4. Select the item. 5. Select in the bottom. You will move to the window. 6. Use the four direction buttons or the number buttons on the front panel or the remote control to adjust the data position. Display Position Setup 30 30 30 30 OK Cancel 50_ using the DVR