Samsung SSG-3050GB User Guide - Page 2

+ Pairing steps 1. Turn on the lV, and then move the glasses within 19.5 inches of the lV. 2. Press the power button on the 3D glasses briefly. The 3D glasses will power on and pairing will start. 3. The message "3D glasses are connected to lV." will be displayed on the lV screen when the pairing is successfully completed. ~ If the pairing failed, the 3D glasses will power off. ~ If the first attempt to pair fails, power the lV off and on again and perform step 2. ~ How to pair again: Press the power button on the 3D glasses for more than 2 seconds. - If the 3D glasses do not function, even when the power button is pressed on the 3D lV after repair. + .- If you want to view a 3D video on a different Samsung 3D lV released in 2011. Replacing the Batteries If the red LED blinks every two seconds continually, replace the batteries with new ones. -~------- Fold the r:x:Nf:l: by 00 degroos 0 ~ Please insert the battery in the same direction as indicated. I EngiiSh-2 +Viewing guidelines • When viewing a 30 video under a fluorescent lamp (50 Hz - 60 Hz) or *3-wavelength lamp, you may notice a small amount of screen flickering. If this occurs, dim or turn off the light. • Switching the input mode while watching a 3D movie may disable the 3D function on the lV. As a result, the 3D glasses may not function and the movie may not be displayed properly. • If the 3D glasses are moved outside of their working distance, the signal from the lV will disconnect and the glasses' 3D function will turn off after several seconds. The 3D glasses will power off 30 seconds after the 3D function turns off. When this happens, the red LED will turn on for 3 seconds. * Under some circumstances, the 3D glasses may malfunction due to interference from other devices. • Ensure you are within the working distance of the glasses when you view a 3D video. * The images may not be viewable in 3D if you move outside of the working distance for 3 seconds. • If you lie on your side while watching lV with 3D active glasses, the picture may appear dark or may not be visible. • The 3D glasses may not work properly due to interference from other 3D products or electronic devices that operate on the 2.4GHz frequency such as a microwave oven or Internet AP. If the 30 function malfunctions due to interference, please move all other electronic or wireless communication devices as far away from the glasses and the lV as possible. • The 3D effect may be experienced differently depending on the viewer. You may not notice the 3D effect at all if you wear glasses and have an unusual prescription. • If a part of the 3D glasses or lenses is defective or damaged, it cannot be repaired and the glasses should be replaced. If the glasses stop working within the warranty period, the glasses can be repaired or replaced for free. If the glasses have been damaged due to the fault of the customer or the warranty period has expired, a new pair of glasses will have to be purchased.