Samsung SWA-W500/ZA User Manual - Page 7

Connecting the SWA-W500 to a Soundbar 1. Check the standby status after plugging into an electrical outlet Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless Subwoofer to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the Wireless Subwoofer blinks. If the LED does not blink, refer to page 9. POWER ID SET POWER Blue blinking ID SET LINK SERVICE POWER POWER ID SET Rear of the Wireless Subwoofer Front of the Wireless Subwoofer •• The main unit is heavy. Be careful not to pinch your fingers when pressing the ID SET button or connecting the power cord to the rear of the unit. •• The upper part of the subwoofer is prone to scratches. Handle it carefully. Speaker Unit Bottom of the Wireless Subwoofer •• Do not press on or strike the Speaker Unit on the bottom of the body. You can deform or damage the speaker. 2. Turn off the Soundbar Turn off the Soundbar by pressing the (Power) button on the remote control. R (Red) G (Green) R B (Blue) PAIR Red Blinks X3 C (Cyan) •• The images of the Soundbar shown on this page may differ from your Soundbar, depending on the model. SOUND ENG - 7 MODE VOL WOOFER SOUNDBAR