Samsung UN19C4000PD User Manual (user Manual) (ver.1.0) (English) - Page 5

01 Getting Started Install the Stand (UN19C4000, UN22C4000 / UN22C4010) See separate guide for installing the stand. Stand Base Follow the steps below to connect the TV to the stand. RELEASE LOCK Stand Body 1. Insert the stand body into the stand base. 2. Screw the stand base to the stand 3. Slide the TV onto the stand body. body. ✎✎NOTE xx Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them. xx Lay the product down, with the screen facing up and fasten the screws. Install the Stand (UN26C4000) See separate guide for installing the stand. s s s s s (A) 5EA (M4 X L12) (B) 5EA (M4 X L8) Stand (1EA) Guide Stand (1EA) Follow the steps below to connect the TV to the stand. Top view Screws (M4 X L12) Guide Stand Stand s s s s s s s s s s Rear 1. Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown. 2. With your TV upright, connect the TV to the Stand as shown. Screws (10EA) 2 s s s s s 1 3. Fasten two screws (M4 X L8) at position 1, and then fasten three screws (M4 X L8) at position 2. ✎✎NOTE xx Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them. xx Make sure that at least two persons lift and move the LED TV. xx Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to one side. 5 English