Samsung UN46C6400 User Manual - Page 17
P.SIZE, Picture Options - calibration
View all Samsung UN46C6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
03 Basic Features ■ Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast. ■ Shadow Detail (-2~+2): Increase the brightness of dark images. ■ Gamma: Adjust the primary color intensity. ■ Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern function, the picture can be calibrated. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears. Off: Turns the Expert Pattern function off. Pattern 1: This is a test screen designed to demonstrate the affects of display settings on shades. Pattern 2: This is a test screen designed to demonstrate the affects of display settings on colors. ✎ After selecting Pattern 1 or Pattern 2, you can adjust any of the advanced settings to the desired effect. ✎ While the Expert Pattern is running, sound is not output. ✎ Only enabled on DTV / Component / HDMI. ■ RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation. ■ Color Space (Auto / Native / Custom): Adjust the range of colors available to create the image.To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom. ■ White Balance: Adjust the color temperature for a more natural picture. R-Offset / G-Offset / B-Offset: Adjust each color's (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjust each color's (red, green, blue) brightness. Reset: Resets the White Balance to it's default settings. ■ 10p White Balance (Off / On): Controls the white balance in 10 point intervals by adjusting the red, green, and blue brightness. ✎ Available when the picture mode is set to Movie and when the external input is set to HDMI or Component. ✎ Some external devices may not support this function. Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default settings. ■ Flesh Tone: Emphasize pink "Flesh Tone." ■ Edge Enhancement (Off / On): Emphasize object boundaries. ■ xvYCC (Off / On): Setting the xvYCC mode on increases detail and color space when watching movies from an external device (e.g. BD/DVD player) connected to the HDMI or Component IN jacks. ✎ Available when the picture mode is set to Movie and when the external input is set to HDMI or Component. ✎ Some external devices may not support this function. ■ LED Motion Plus (Off / On): Removes drag from fast scenes with a lot of movement to provide a clear picture. Picture Options MENU ENTER Picture Picture Options ✎ In PC mode, you can only make changes to the Color Tone, Size, Digital Noise Filter and Auto Protection Time. ■ Color Tone (Cool / Normal / Warm1 / Warm2) ✎ Warm1 or Warm2 will be deactivated when the picture mode is Dynamic. ✎ Settings can be adjusted and stored for each external device connected to an input on the TV. ■ Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. P.SIZE 16:9: Sets the picture to 16:9 wide mode. Zoom1: Use for moderate magnification. Zoom2: Use for a stronger magnification. Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen. ✎ Available for HD 1080i / 720p signal in 16:9 mode. 4:3: Sets the picture to basic (4:3) mode. ✎ Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty. English