Samsung WA45H7000AW/A2 User Manual Ver.1.0 (English, French, Spanish) - Page 23

03 washing a load of laundry Washing clothes using the cycle selector Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control" automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed. 1. Press the Power button. 2. Open the lid. 3. Load the articles of clothing one at a time loosely into the drum, without overfilling it. 4. Add liquid (or powder) detergent, softener, and/or bleach (if necessary) to the appropriate compartments. See pages 24~26. 5. Close the lid. 6. Use the Cycle Selector to select the appropriate cycle according to the type of material: NORMAL, HEAVY DUTY, COLORS/DARKS, BEDDING, DELICATES, WATERPROOF, PERM PRESS, ACTIVE WEAR, QUICK WASH, SPIN, RINSE+SPIN. The relevant indicators will illuminate on the control panel. 7. At this time, you can control the wash temperature, the number of rinse cycles, the spinning speed, and the delay time by pressing the appropriate option button. 8. Press the Start/Pause button on the Cycle Selector and the wash will begin. The process indicator will light up and the remaining time for the cycle will appear in the display. Pause Option To remove or add laundry items, follow these steps: 1. Press the Start/Pause button to unlock the lid. The lid cannot be opened when the water is too HOT. 2. Remove or add laundry items. 3. Close the lid, and then press the Start/Pause button to restart the wash. If you have Child Lock on, you must deactivate it first. See page 20. When the cycle is finished: After the total cycle has finished, the power will turn off automatically. 1. Open the lid. 2. Remove laundry. ATC (Auto Temperature Control) ATC is the control function that the washer controls water temperature with temperature sensor (thermistor). Because there are numerous water temperatures depending on the customer's environments(cold areas, warm areas, various water temperature, settings of heater temperature, etcs), ATC function in our washer maintains the certain level of wash temperature to output the best washing performance at each cycle. If you select normal & heavy duty course, those courses are the regulation and UL course. Since new washer must reduce the amount of energy usage at first priority, customer will notice more cold water entering the washer. But This is Normal, not a problem. In those regulation course, Hot temperature is similar to acceptable adult bath-water temperature and warm temperature is similar to comfortable swimming-pool water temperature. If customer want to wash clothes in specific water temperature, customer should choose a different course at each temperature(Hot/Warm/Eco Warm) English - 23 8")"
8"4)@8")@64&3
."/6 1@&/JOEE