Samsung WA48H7400AP/A2 Trouble Shooting Guide Tech Manual (English, French, Sp - Page 11
Demo Mode, WARNING
View all Samsung WA48H7400AP/A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to washer before servicing, unless testing requires power. Demo Mode Pre Soak + Self Clean 3sec While a cycle is not running - Demo mode is entered when the Pre Soak + Self Clean buttons are held down for five (5) seconds simultaneously in the power on state. - When entering Demo mode, the buzzer rings three (3) times and "- - - -" is displayed on the 7 segment display and all other LEDs are turned off. (Initial Demo mode) - Demo mode consists of WASH, SPIN and LED modes. - If the Temp. button is pressed during the initial Demo mode, "USH"("US"(WA45H7000A*)) blinks on the 7 segment display and the washing machine enters WASH mode. - If the Start/Pause button is pressed in WASH mode, the door is locked (Door Lock) and the motor rotates left and right at 100 RPM in a 1.5 sec on and 1.0 sec off cycle. - WASH mode continues up to five (5) minutes once started. After the five (5) minutes have elapsed, "- - - -" is displayed on the 7 segment display and the initial Demo mode is maintained. - If the Start/Pause button is pressed during a WASH mode operation, "- - - -" is displayed on the 7 segment display and the initial Demo mode is maintained. - If the Spin button is pressed in the initial Demo mode, "SPn"("SP"(WA45H7000A*)) blinks on the 7 segment display and the washing machine enters SPIN mode. - If the Start/Pause button is pressed in the SPIN mode, the door is locked (Door Lock) and a spin is operated at 1030 RPM (WA48H7400A*) / 800 RPM (WA45H7200A* / WA45H7000A*). - SPIN mode continues up to four (4) minutes once started. After the four (4) minutes have elapsed, "- - - -" is displayed on the 7 segment display and the initial Demo mode is maintained. - If the Start/Pause button is pressed during a SPIN mode operation, "- - - -" is displayed on the 7 segment display and the initial Demo mode is maintained. - If the Soil Level button is pressed in the initial Demo mode, "LED"("LE"(WA45H7000A*)) blinks on the 7 segment display and the washing machine enters LED mode. - If the Start/Pause button is pressed in LED mode, all LEDs are turned on. The LED mode continues up to thirty (30) seconds once started. After the thirty (30) seconds have elapsed, "- - -" is displayed on the 7 segment display and the initial Demo mode is entered. - If the Start/Pause button is pressed during an LED mode operation, "- - - -" is displayed on the 7 segment display and the initial Demo mode is entered. 11 8")"8"4)@8")@5&$)."/6 JOEE