Samsung WAM1500 User Manual - Page 12

❚❚ Connecting the Power Cord 1 Connect the power cord of your speaker as shown. It will connect at an angle. ADD SPK/Wi-Fi SETUP SERVICE1 SERVICE2 POWER 2 Push the power cord into the notch at the edge of the speaker bottom. This lets the speaker rest flat when you stand it up. SPK ADD/Wi-Fi SETUP SERVICE1 SERVICE2 POWER 1 Connect the adaptor's input power cord to the adaptor. 2 Connect the adaptor's output power cord (with the round plug) to the DC 19V jack on the speaker. 3 Push the power cord into the notch at the edge of the speaker bottom. This lets the speaker rest flat when you stand it up. SPK ADD/Wi-Fi SETUP SERVICE DC 19V NOTE 99Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction. 444 12