Samsung WAM1500 User Manual - Page 18
Reset the HUB. Refer to the HUB's, ETHERNET SWITCH - troubleshooting
View all Samsung WAM1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Symptom Check The HUB doesn't work properly. •• Is the HUB plugged in? •• Is the LAN cable connected to the wireless router and the HUB properly? •• When the Hub is plugged in, do the HUB's front indicators show it's operating properly? The WAM speaker doesn't work •• Is the speaker plugged in? properly. Remedy •• Plug in the HUB. •• Connect a LAN cable to an ETHERNET SWITCH port on the back of the HUB and to your wireless router. •• Reset the HUB. (Refer to the HUB's user manual for details.) •• If you experience problems connecting the HUB and WAM speaker, try relocating the WAM speaker so that it is closer to the wireless router or HUB. •• Plug in the speaker. •• Unplug the speaker, plug it back in, and then reconnect it to the router. •• Reset the WAM speaker. (see page 4) Click here. •• If used with a HUB -- Make sure your smart device and the HUB are connected to the same Wi-Fi network. -- Make sure the HUB's indicator LED's show that it is working correctly. -- If the problem persists, reset the HUB. (Refer to the HUB's user manual for details.) -- Unplug, then plug in the HUB. Then, unplug and plug in the WAM speaker. -- If you experience problems connecting the HUB and WAM speaker, try relocating the speaker so that it is closer to the wireless router or HUB. NOTE 99If the problem persists, contact the Samsung Call Center for troubleshooting. 444 18