Samsung WF209ANW User Manual (user Manual) (ver.1.0) (English) - Page 21
will go back to the operation.
View all Samsung WF209ANW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
05 troubleshooting High current detected. Restart the cycle. If the code reappears, call for service. High/Low voltage detected. Restart the cycle. If the code reappears, call for service. Too many suds are detected during the washing session. To prevent it, cut down on detergents. The unit is put on hold until the suds are reduced. Then, the unit will go back to the operation. When it finishes washing, End and Sd codes will blink in turn. For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG) WF209ANW-02440F_EN.indd 21 troubleshooting _21 2009-01-20 ¿ÀÈÄ 4:05:19
troubleshooting
_21
High current detected.
Restart the cycle.
If the code reappears, call for service.
High/Low voltage detected.
Restart the cycle.
If the code reappears, call for service.
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, End and
Sd codes will blink in turn.
To prevent it, cut down on detergents.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
05 troubleshooting
WF209ANW-02440F_EN.indd
21
2009-01-20
¿ÀÈÄ 4:05:19