Samsung WF219ANB User Manual (user Manual) (ver.1.0) (English) - Page 17

Cleaning The Debris Filter

Get Samsung WF219ANB PDF manuals and user guides View all Samsung WF219ANB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

CLEANING THE DEBRIS FILTER We recommend cleaning the debris filter when water does not drain well or the "ND" error message is displayed. 1. Open the filter cover by using a key or coin. 04 maintaining your washer 2. Unscrew the drain cap by turning it counterclockwise. 3. Hold the cap on the end of the drain tube and slowly pull it out about 6inches (15cm) and drain off all the water. Step 1 4. Remove the debris filter cap. Step 2 5. Wash any dirt or other material from the debris filter. Make sure the drain pump propeller behind the debris filter is not blocked. 6. Replace the debris filter cap. 7. Replace the filter cover 8. Close up the opening of drain tube with cap. 9. Don't insert the drain tube in the hole WF218ANB-02440B-04_EN.indd 17 maintaining your washer _17 2009-03-06 ¿ÀÈÄ 4:14:01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
maintaining your washer
_17
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the “ND” error message is
displayed.
1.
Open the filter cover by using a key or coin.
2.
Unscrew the drain cap by turning it counter-
clockwise.
3.
Hold the cap on the end of the drain tube and
slowly pull it out about 6inches (15cm) and
drain off all the water.
4.
Remove the debris filter cap.
5.
Wash any dirt or other material from the
debris filter. Make sure the drain pump
propeller behind the debris filter is not
blocked.
6.
Replace the debris filter cap.
7.
Replace the filter cover
8.
Close up the opening of drain tube with cap.
9.
Don’t insert the drain tube in the hole
04 maintaining your washer
Step 1
Step 2
WF218ANB-02440B-04_EN.indd
17
2009-03-06
¿ÀÈÄ 4:14:01