Samsung WF241ANW/XAA User Manual Ver.1.0 (English, French, Spanish) - Page 29
troubleshooting and, information codes
View all Samsung WF241ANW/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
04 TROUBLESHOOTING troubleshooting and information codes CHECK THESE SOLUTIONS IF YOUR WASHER... PROBLEM SOLUTION will not start.. • Make sure the door is firmly closed. • Make sure your Washer is plugged in. • Make sure the water source faucets are open. • Make sure to press the Start/Pause Button to start your Washer. • Make sure the Child Lock is not activated. See page 21. • Before your Washer starts to fill, it will make a series of clicking noises as it checks the door lock and does a quick drain. • Check the fuse or reset the circuit breaker has no water or not enough • Turn both faucets on fully. water.. • Make sure the door is tightly closed. • Straighten the water inlet hoses. • The hose filter screens may be plugged. Disconnect the hoses and clean the screens. • Open and close the door, then press the Start/Pause Button. has detergent remains in the automatic dispenser after the wash cycle is complete. • Make sure your Washer is running with sufficient water pressure. • Make sure the Detergent Selector dial is in the upper position when using granular detergent. vibrates or is too noisy. • Make sure your Washer is set on a level surface. If the surface is not level, adjust your Washer feet to level the appliance. • Make sure that the shipping bolts are removed. • Make sure your Washer is not touching any other object. • Make sure the laundry load is balanced. stops • Plug the power cord into a live electrical outlet. • Check the fuse or reset the circuit breaker. • Close the door and press the Start/Pause Button to start your Washer. For your safety, your Washer will not tumble or spin unless the door is closed. • Before your Washer starts to fill, it will make a series of clicking noises as it checks the door lock and does a quick drain. • There may be a pause or soak period in the cycle. Wait and it may start. • Check the screens on the inlet hoses at the faucets for obstructions. Clean the screens periodically. WF241ANW-02832E_EN_v1.indd Sec8:29 troubleshooting and information codes _29 2011-08-10 4:20:53