Samsung WF365BTBGSF/A2 User Manual Tech Manual (English, French, Spanish) - Page 5

ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to washer before servicing, unless testing requires power. Definition of Quick Test Mode: - Check operation of all LED's (Verify faulty LED). - Check model and software version. - Check different operating modes (e.g. water valve, motor, door, drain pump, etc.). How to Enter: - Plug in the unit. - Press Soil Key, Spin Key and Power Key at the same Time. Quick Test Mode: 1. All LED's light up and it sends out Beep Sound when it enters into the Quick Test Mode. (Including 7-Segment) 2. Displays software version for a sec and Clear EEprom. (Ex. If S/W Version is 04, 7-Segment will display Ud04) 3. When the version is displayed, turn the Jog-Dial so that the version disappears. Press the following keys to test the various components. - Temp Key : Water Valve Test - Spin Key : Door Lock/Unlock Test - Soil Key : Water Heater Test - Signal : Drain Pump Test EEPROM Clear Check Definition of EEPROM Clear Mode: - EEPROM initialization. - All course/option settings are to be reset to default values after EEPROM initialization. - When Service arises and it needs PCB replacement, EEPROM should be reset. How to Enter: - The unit needs to be on. - Press Delay Start Key, and Power Key at the same time. 5