Samsung WF395BTPASU/A1 Trouble Shooting Guide User Manual Ver.1.0 (English, Fr - Page 5
Quick Test Mode, WARNING - washer model
View all Samsung WF395BTPASU/A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to washer before servicing, unless testing requires power. Definition of Quick Test Mode: - Check operation of all LED's (Verify faulty LED). - Check model and software version. - Check different operating modes (e.g. water valve, motor, door, drain pump, etc.). How to Enter: - Plug in the unit. - Press Soil Level Key + Signal Key and Power Key at the same Time. Important. Once test mode is performed, all data including the diagnostic code saved in the EEPROM will be erased. Quick Test Mode: 1. All LED's light up and it sends out Beep Sound when it enters into the Quick Test Mode. (Including 7-Segment) 2. Displays software version for a sec and Clear EEprom. (Ex. If Machine Version is L9 and S/W Version is 49, 7-Segment will display L949) 3. When the version is displayed, turn the Jog-Dial so that the version disappears. Press the following keys to test the various components. - Temp Key : Water Valve Test - Spin Key : Door Lock/Unlock Test - Soil Key : Water Heater Test 5 WF395BTP-03144B_EN_20120604.indd 5 2012-06-04 �� 11:53:55