Samsung WF395BTPASU/A1 Trouble Shooting Guide User Manual Ver.1.0 (English, Fr - Page 6
EEPROM Clear Check, Continuous Run Mode, WARNING
View all Samsung WF395BTPASU/A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to washer before servicing, unless testing requires power. EEPROM Clear Check Definition of EEPROM Clear Mode: - EEPROM initialization. - All course/option settings are to be reset to default values after EEPROM initialization. - When Service arises and it needs PCB replacement, EEPROM should be reset. How to Enter: - The machine must be turned off. - Press Delay Start Key, Power Key at the same time. Continuous Run Mode Definition of Continuous Run Mode: - Will continuously repeat the current cycle until the Continuous Run Mode is cancelled. How to Enter: - Press DelayStart + ExtraRinse together for 7 sec. Continuous Run Mode: 1. Press DelayStart + ExtraRinse 7 sec during Power On State (Normal User Mode) . 2. Once in Continuous Run Mode, The seven segments will no longer display "0000" and will alternate between displaying the number of cycles of the completed course and the remaining time of the course. 3. The Continuous Run Mode will repeat the previous cycle until continuous run mode is cancelled. 4. During Continuous Run Mode, press DelayStart + ExtraRinse 7 seconds to return to normal user mode. The seven segments will no longer display the number of cycles and will display the maintenance time only. 5. If power is lost in Continuous Run Mode (that is, when the power plug is disconnected or the Power key is pressed turning the washing machine off ), the mode is released when the washing machine is turned on again. 6 WF395BTP-03144B_EN_20120604.indd 6 2012-06-04 �� 11:53:56