Samsung WF409ANR/XAA (English) - Page 25

Storing Your Washer, Cleaning The Debris Filter

Get Samsung WF409ANR/XAA PDF manuals and user guides View all Samsung WF409ANR/XAA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

03 CLEANING AND MAINTAINING STORING YOUR WASHER Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare your washer for storage as follows: • Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your washer through the cycle without a load. • Turn the water faucets off and disconnect the inlet hoses. • Unplug your washer from the electrical outlet and leave your washer door open to let air circulate inside the tumbler. • If your washer has been stored in below-freezing temperatures, allow time for any leftover water in your washer to thaw out before use. CLEANING THE DEBRIS FILTER We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displayed. 1. Open the filter cover by pressing and pulling the handle of the filter cover with your finger. Filter cover 2. Unscrew the drain cap by turning it counterclockwise. 3. Hold the cap on the end of the drain tube and slowly pull it out about 6 in.(15 cm) and drain off all the water. Step 1 Step 2 Drain cap 4. Remove the debris filter cap. Debris filter cap WF409ANW-02657D-02_EN.indd 25 cleaning and maintaining your washer _25 2009-12-04 ¿ÀÀü 11:19:45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
cleaning and maintaining your washer
_25
03 CLEANING AND MAINTAINING
STORING YOUR WASHER
Washers can be damaged if water is not removed from hoses and internal components before storage.
Prepare your washer for storage as follows:
•
Select the
Quick Wash
cycle and add bleach to the automatic dispenser. Run your washer through the
cycle without a load.
•
Turn the water faucets off and disconnect the inlet hoses.
•
Unplug your washer from the electrical outlet and leave your washer door open to let air circulate inside
the tumbler.
•
If your washer has been stored in below–freezing temperatures, allow time for any leftover water in your
washer to thaw out before use.
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the “nd” error message is
displayed.
1.
Open the filter cover by pressing and pulling the handle
of the filter cover with your finger.
2.
Unscrew the drain cap by turning it
counterclockwise.
3.
Hold the cap on the end of the drain tube
and slowly pull it out about 6 in.(15 cm) and
drain off all the water.
4.
Remove the debris filter cap.
D
ebris filter cap
F
ilter cover
Step 2
Step 1
Drain cap
WF409ANW-02657D-02_EN.indd
25
2009-12-04
¿ÀÀü 11:19:45