Samsung WF419AAW User Manual (ENGLISH) - Page 25
Information Codes
UPC - 036725581968
View all Samsung WF419AAW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
05 troubleshooting INFORMATION CODES Information codes may be displayed to help you better understand what is occurring with your washer. CODE SYMBOL MEANING SOLUTION dc Unbalanced load prevented your Redistribute the load, press the Start/Pause washer from spinning. button. Door is unlocked when washer is Press the Power button to turn off your washer, dL running. then restart the cycle. If the code reappears, call for service. Door is open when washer is Close the door tightly and restart the cycle. dS running. If the code reappears, call for service. Your washer failed to lock the Close the door tightly and restart the cycle. FL door. If the code reappears, call for service. Water temperature control Hr problem. (Heater Control problem) Call for service. Your washer has tried to fill but Call for service. LE has not reached the proper water level. The door will not unlock. LO Make sure the door is firmly closed. Push the Power button to turn off your washer, then turn it on again. If the code reappears, call for service. E3 Motor not running properly. Restart the cycle by pressing the Start/Pause button. If the code reappears, call for service. Your washer is not draining. Before calling for service, check the following. It can also mean that the unit Clean the filter (page 19). senses a small clog while draining. or 1. Turn off the unit for 10 seconds and then turn nd it on again. 2. Select only the Spin Cycle. 3. Press the Start/Pause to drain the water. If it still does not drain, call for service. Your washer has tried to fill but Make sure the water faucets are open all the nF was unsuccessful. way. Check for kinked hoses. Check the inlet screens on the fill hoses. nF1 The hot/cold water hose connection is not correct. Please connect the hot/cold water hose connection correctly. Sr Problem with control. Call for service. OE A fault is detected in the water level sensor. Call for service E2 Jammed Key. Call for service Temperature sensor problem. Restart the cycle. tE If the code reappears, call for service. troubleshooting _25 BEST-WF419AAW-02657A_EN.indd 25 2009-02-18 ¿ÀÈÄ 3:26:51