Samsung WF520ABW User Manual (user Manual) (ver.1.0) (English) - Page 36
Error Image, Meaning, Solution
UPC - 036725569843
View all Samsung WF520ABW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
troubleshooting ERROR IMAGE Water Temperature Control Problem Power Interruption MEANING The hot/cold water hose connection is not correct. SOLUTION Please connect the hot/cold water hose connection correctly. Problem with control. Call for service. Water Supply Problem A Button is either stuck or is being pressed continuouly. The Motor is not working properly. Temperature Sensor Problem High/Low Voltage Detected A fault is detected in the water level sensor. Jammed key. Motor problem Temperature sensor problem. High/Low voltage detected. Electronic Control Problem Front MEMS Sensor Problem Communication error between SUB PBA and MAIN PBA Front MEMS sensor problem Call for service Call for service Restart the cycle If the code reappears, call for service Restart the cycle. If the code reappears, call for service. Restart the cycle. If the code reappears, call for service. Call for service Call for service Rear MEMS Sensor Problem Rear MEMS sensor problem Call for service Excessive Suds Too many suds are detected during the washing session. The unit is put on hold until the suds are reduced. Then, the unit will go back to the operation. When it finishes washing, "End" and "Excessive Suds" codes will blink in turn. To prevent it, cut down on detergents. For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG) 36_ troubleshooting WF520AB-02838A_EN.indd 36 2010-03-24 ¿ÀÈÄ 4:30:39