Samsung WV60M9900AV/A5 User Manual - Page 43

Operations Your dual loading washer features upper and the lower washers for your convenience. The upper washer is an automatic tub loader that is designed to wash relatively small loads while the lower washer is a drum loader that takes care of normal or relatively heavy loads. The main panel is divided into 2 independent control panels. WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this washer. Upper washer Control panel 01 02 03 04 05 06 07 08 Operations 01 Cycle bar 02 POWER 03 START/PAUSE (Hold to Start) 04 Status bar 05 Temp. 06 Extra Rinse 07 Self Clean 08 Smart Control Press to select a cycle. Press to turn the upper washer on or off. Press and hold to start operation or press to stop operation temporarily. The status bar shows current cycle information and estimated time remaining, or an information code if the upper washer needs to be checked. Press to toggle between two different water temperature options. • Warm: Colorfast items. • Cold: Brightly colored, very lightly soiled items. Use to add an additional rinse at the end of the cycle to remove laundry additives more thoroughly. Use to clean dirt and bacteria from the tub. Regular use (after every 20 washes) is recommended. No detergent or bleach is needed. Make sure the tub is empty. After connecting the upper washer to your home network using the Samsung Smart Home app, you can control the washer remotely. When started, the Smart Control indicator blinks and the top door locks. The washer enters waiting mode and waits for remote commands. For more information, visit the Samsung Smart Home page. WV60M9900A-03768A-00_EN.indd 43 English 43 2017-01-13 4:35:44