Samsung YP-N30 User Manual (user Manual) (ver.1.0) (English) - Page 8

Connecting yepp to PC with USB cable 3 Plug one end of the USB cable into the USB port on the back of the PC. 4 Insert the battery into the yepp and turn on the power. 5 Slide down the bottom cover of the player. Plug the other end of the USB cable into the USB port on the right side at the bottom. q PC may temporarily malfunction if you unplug the USB cable from PC while yepp Explorer is initiating or executing a command. 6 USB driver is installed a message saying that it is searching for a new device. You may not see the display screen during installation. Go to the device manager to check that installation has been successfully completed. 14 USB connect cable 7 When USB driver is installed, "SAMSUNG YP-N30" will appear in [System Properties] ➝ [Device Manager] as shown in the picture to the right. Note : How to check USB driver Windows 98,ME: Control Panel ➝ System ➝ Device Manager ➝ Universal Serial Bus controllers/SCSI and RAID controllers Windows 2000: Control Panel ➝ System ➝ Hardware ➝ Device Manager Windows XP: Control Panel ➝ System ➝ Hardware ➝ Device Manager 8 When USB driver is not Installed automatically, refer to next page. 15