SanDisk E130 User Guide - Page 3

What You Need to Begin To add music to the Sansa e100 MP3 Player, the following are needed: „ Intel Pentium PC or equivalent. „ Windows 2000 or Windows XP (Windows Media Player 9 or 10). „ CD-ROM drive „ USB 2.0 port required for High-Speed transfer. „ Supports MP3, WMA, secure WMA and Audible audio file formats Your Sansa Package contains: „ Sansa e100 Series MP3 Player „ Earphones „ Armband „ AAA battery „ USB 2.0 travel cable „ CD with valuable software and User Manual „ Quick Start Guide Installing the Battery Follow the steps as shown in Figure 1: 1. Turn your player over, so the backside faces up, and locate the battery door at the bottom of the player. 2. Gently depress and pull the battery cover out towards the outside edge of your player. 3. Lift off the battery cover. 4. Push the battery down into the battery area of the player, placing the smooth bottom (--) of the battery against the spring in the battery area. The protruded top (+) of the battery slips down and under. The battery should fit snugly. 5. Replace the battery cover until it snaps closed. Quick Start ` 2