SanDisk SDMX9N-1024B-A18 User Manual - Page 7

4) Wait until the 'The USB Mass Storage Device can now be safely removed from the system' message appears. 5) Remove the USB cable from the Sansa Shaker™ player and the computer. 4) To resume playing, press the Power/Play/Pause button. The LCD will blink while the music is playing. Note: The Sansa Shaker player will only play MP3 or PCM WAV files. Volume Control To turn up the volume, turn the Top Twist to the right. To turn the volume up fast, turn the Top Twist to the right and hold it. Turn Shaker Player On To turn on the Sansa Shaker™ player, press and hold the Power/Pause/Play button for approximately 2 seconds or until you hear a 'Drum Roll Up' sound. To turn down the volume, turn the Top Twist to the left. To turn the volume down fast, turn the Top Twist to the left and hold it. Turn Shaker Player Off To turn off the Sansa Shaker™ player, press and hold the Power/Play/Pause button for approximately 5 seconds or until hear a short 'Drum Roll Down' sound. Skipping Track To skip to the next song, turn the Bottom Twist to the right. Listen to Music 1) Plug the headphones (included) into the Headphone jack on either the sides of the unit. 2) Turn on the Sansa Shaker™ player. The music will automatically start playing shortly. 3) To pause, press the Power/Play/Pause button once. The LCD will blink twice approximately every 3 seconds while the music is paused. The player will turn off automatically after approximately 3 minutes in pause. To fast forward the current song, turn the Bottom Twist to the right and hold it.