SanDisk SDMX9N-1024B-A18 User Manual - Page 8

To replay the previous song from the beginning, turn the Bottom Twist to the Left. Shaker Sounds The Sansa Shaker player is triggered to make sound effects with the following audio clips during these actions: Single UH-OH sound occurs when: • SD card is removed from the slot • Pressing the Play button without SD card in the slot • The SD card inserted in the slot is damaged • Low battery level To rewind the current song, turn the Bottom Twist to the left and hold it. Shake Feature The shake feature is used to skip to another track (song) randomly. Please execute the following steps to enable the shake feature. 1) Turn on your Sansa Shaker™ player. 2) Make sure the music is playing. 3) Hold the player with the speaker facing up. 4) Press and hold the Power/Play/Pause button. 5) Shake the player up and down 1 time. You should hear a shutter sound indicating that the Sansa Shaker™ successfully skipped to another song. Double UH-OH sound occurs when inserting an empty SD card (no MP3 files or WAV files loaded on the card). POP sound occurs when inserting a SD Card with valid music content into player while it is turned on. SHAKE sound occur when you shake the player while pressing and holding the PLAY/PAUSE button during music playback. This will cause the player to randomly skip to next song. LASER sound occurs when you shake the player when it is in PAUSE mode. DRUM ROLL UP sound occurs when turning on Shaker player. DRUM ROLL DOWN sound occurs when shutting down the Shaker player.