Sanyo 18KHS72 Instruction Manual - Page 19

3. How to set the ON time Setting the Timer (continued) (Example) To start operation at 7:10 am. Operation 1. Press the ON TIME setting button once. 2. Press the Advance, Return ( , ) button until AM 7:10 is displayed. 3. Wait a few seconds, and then the setting is complete. Indication The timer indication is displayed, and the present ON time is shown. The timer indication blinks. The time can be set in 10-minute increments. Holding down the button advances the time rapidly in 10-minute increments. The timer indication stops blinking and the present time is displayed. 4. How to set DAILY ON/OFF (Example) To start operation at 7:10 am. and stop the air conditioner at 11:00 am. REPEAT timer 10:30 pm. Present time 7:10 am. ON 11:00 am. OFF 1. Set the timer ON/OFF times as The present time 10:30 pm. and shown in 2-1, 2, 3 and 3-1, 2, 3. are displayed. NOTE • The ON/OFF combination timer uses the current time as the reference, and it is activated starting from whichever set time comes first. • With the ON/OFF combination timer, the settings are repeated every day. • You can check the timer ON/OFF times after you have set them by pressing the ON TIME and OFF TIME setting buttons. To cancel a timer program • Press the CANCEL button. • When either an ON or OFF timer is to be canceled, press the button corresponding to the timer whose program is to be canceled, and then press the CANCEL button. NOTE • The airflow direction, fan speed and temperature setting can be changed after a timer program has been set even when the unit is stopped. Even when operation is stopped during an ON timer program, the unit will start operating when the set time is reached provided that the program is not canceled. • When the ON timer and OFF timer are set to the same time, the timer operates as if it is turned off. OI-801-19EG 19