Sanyo CE42LM4N-NA RS232C Basic - Page 9

6.4 Operation Requirements When the TV's status in this below, Functional Execution Commands are limited. TV Status Available Functional Execution Commands Standby Mode Power Save Status POWER ON POWER ON Note) When the status is above, even if the TV receives other command, it returns [ACK] [CR]. 6.5 POWER ON Command Command "C00" [CR] Detail Power ON. When already Power ON, no operation is necessary. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.6 POWER OFF Command Command "C01" [CR] Detail Power OFF (Standby). When already standby mode, no operation is necessary. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.7 Wide "Auto" direct Command Command "C23" [CR] Detail Set wide mode to "Auto" directly. When PC mode or AV2 RGBHV mode, no operation is necessary Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.8 Wide "Natural" direct Command Command "C24" [CR] Detail Set wide mode to "Natural" directly. When PC mode or AV2 RGBHV mode, no operation is necessary Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.9 Wide "Zoom 16:9" direct Command Command "C25" [CR] Detail Set wide mode to "Zoom 16:9" directly. When PC mode or AV2 RGBHV mode, no operation is necessary Acceptable [ACK] [CR] Response Unacceptable "?" [CR] Ver. Page 8